Please 'Boom' Responsibly As most of you have noticed, the noise ordinances have become much tougher lately. Most of this is due to idiots, yes IDIOTS, who drive through residential areas with their windows down while their system is playing at full power. To make things worse, the music they listen to has all sorts of foul language that's not suitable for small children, (who may be playing outside). There are even a few people, who are even beyond idiot status, that play their systems at full power through residential areas after 10:00 PM (when many people go to bed). I don't believe that this type of behavior is good for the industry. If the fines get too stiff, people will stop buying large systems. If this happens, more people will get out of car audio (who wants a mediocre system). People get interested in things because they're exciting. A deck and four 6.5" speakers are not going to interest many of the younger car audio enthusiasts. If car audio enthusiasts keep annoying more and more people, the fines will keep getting tougher. All of this will only reduce interest in the equipment that fuels the industry. If you want to listen to your system at full volume, get out on the highway where there's little chance of bothering anyone. When you get to a red light, turn it down. If the only thing attractive about you is your 'system', you have some work to do. Bottom line... Think about what you're doing. Think about other people. It's not the end of the world if you have to turn the volume down for a little while.


Amp(ere):
The amp is the unit of measure for current flow. One amp of current will flow through a resistance of one ohm if one volt of electrical force is applied to the circuit . The current flow will double if either the voltage is doubled or the circuit's resistance is cut in half. The current flow through the circuit will be cut in half if the voltage is cut in half or the resistance is doubled.
Relative Amperage:
The following diagram shows the relative amperage between two systems. The faucet and wire on the left are analogous to high amperage. The faucet and wire on the right are analogous to low current flow.


You should remember:
1.The amp is the unit of measure for electrical flow.


backward If you find a problem with this page or feel that some part of it needs clarification, E-mail me.

This is a link to this site's home page.

forward